Measures Overhead Hazards up to 20 Feet!
In-cab driver programmable read-out
Aerodynamic sealed sensor unit
High performance
Waterproof
Bright LED display
8 feet of coaxial cable
The GiraffeG4 Exterior Magnetic Mount safely and securely attaches the GiraffeG4 sensor unit to any vehicle, allowing you to avoid the hazards caused by overhead obstacles.
| • | Mounts anywhere on the roof or hood of your tow vehicle or pilot car |
| • | Remains secure in all winds and weather |
| • | Easily removable |
| • | Rust-free stainless steel screws |
GiraffeG4 Technology
Easy to install and easy to use on any vehicle!
Click on your vehicle type below to see how it works.
Trucks
| The driver pulls the cab under an overhead hazard. The mirror mounted GiraffeG4 sends a signal at the speed of sound, 3bps. A driver programmable read-out in the cab displays the hazards height. If the hazard is too low, a warning buzzer will sound, and the read-out will flash the low height. If there is enough clearance, the sensor continues to measure the height of the hazard as the truck passes under the hazard. |  |
Recreational Vehicles
| The driver pulls the towing vehicle under an overhead hazard. The mirror mounted GiraffeG4 (optional mounting kit - sold separately) sends a signal at the speed of sound, 3bps. A driver programmable read-out in the cab displays the hazards height. The sensor continues to measure the height of the hazard as the RV passes under the hazard. |  |